MAM Easy Active baby bottles, 270 and 330 ml, yellow and beige

-MAM Easy Active -Infant bottles -270 ml and 330 ml capacities -Ergonomic shape for an easy grip -Wide opening for easy filling and cleaning -Flat SkinSoft teat with a symmetrical shape -Yellow and beige elements with fruit and animal prints -New condition MAM Easy Active bottles are designed for feeding infants and come in 270 ml and 330 ml capacities. Their ergonomic shape makes them easy to hold while feeding, and the wide opening provides convenient access to the inside for filling and cleaning. The flat, symmetrical SkinSoft teat has a soft surface. Yellow and beige elements are paired with delicate fruit and animal prints. The transparent sides and measurement markings make it easy to see how much liquid is inside. W this range, the 270 ml bottle with a flow 2 teat is intended for babies from 2 months, while the 330 ml bottle with a flow 3 teat is intended for babies from 4 months. When choosing, take into account the marking on the teat being used. Care and safety Before first use, read the instructions and the manufacturer's recommendations regarding age, assembly, cleaning, care, temperature or maximum load, where applicable. Use components that come into contact with the child or food as intended, and check them regularly for wear. Manufacturer's warnings — verified English translation Easy Active™ This product complies with the requirements of European standard EN 14350:2020. Before first use • Before first use, disassemble the product and wash it, then place the parts in boiling water for 5 minutes. This is to ensure hygiene. For more information on cleaning, see the relevant section. • When used for the first time, and sometimes during use, the air vent slit in the raised section on the underside of the teat base may stick together. This will prevent air from entering the bottle during feeding and cause the teat to collapse. Slowly run your thumb or fingers over the raised air vent section several times to reopen the slit. Cleaning • Before each subsequent use, disassemble the product and wash it thoroughly in warm water with a mild detergent. Rinse thoroughly with clean water before sterilising to ensure hygiene. Avoid harmful detergent ingredients such as alcohol, chlorine or microplastics. Do not leave the parts in detergent, such as soapy water, for longer than recommended — this may adversely affect the product's performance. • Before each use, check all bottle parts and pull the feeding teat in all directions. Discard it at the first signs of damage or wear. • For proper cleaning, all bottle parts MUST be disassembled. Cleaning the assembled bottle may damage it. • Dishwasher-safe on the top rack (maximum 65°C / 149°F), but food dyes may discolour the parts. • Do not use abrasive cleaning agents. Use only soft-bristled brushes or soft sponges. Hard scouring pads may scratch the plastic. • After cleaning and sterilising, make sure no food residue remains on the bottle parts. Sterilisation • For proper cleaning and sterilisation, all bottle parts MUST be disassembled. • Wash all bottle parts before sterilising. • After washing, sterilise using one of the following methods: steam (in an electric or microwave steriliser, following its manufacturer's instructions), boiling in water for at least 10 minutes, or immersion in a liquid sterilising solution. • Do not leave any part, including the feeding teat, in sterilising solutions for longer than recommended or in direct sunlight or heat — this may adversely affect the product's performance and weaken the teat. • NEVER assemble the bottle parts during sterilisation. This may damage the bottle and deform the threads where its parts screw together. Heating instructions • Heat the bottle using one of the following methods: in a bottle warmer, under hot running water, in a container of heated water or in a microwave. Make sure the grill is switched off. • NEVER pour boiling water into the bottle. • NEVER heat or cool a closed bottle. Remove the cap and teat with the ring before heating, especially before heating in a warmer or microwave. Do not overheat, as this may damage the bottle. • NEVER put the bottle in a conventional oven. NEVER heat it over an open flame or fire. • Take special care when heating in a microwave, as localised overheating may occur. Wait for the time recommended by the microwave manufacturer. Do not place the bottle in the centre of the turntable, as this may result in uneven heat distribution. • NEVER heat a bottle containing food to a temperature above 70°C. • After heating the bottle, always mix the contents thoroughly to distribute the heat evenly. It is better to stir the food rather than shake it, to avoid air bubbles that may cause colic. • Always check the temperature before feeding. Further important information • The bottle is made of polypropylene, which is hygienic, easy to clean and relatively soft. Avoid applying strong pressure, as this may affect the bottle's performance. • Do not use a pin or a sharp object to enlarge the hole in the feeding teat. • Do not allow infants to feed themselves. • Always store the bottle dry. • Store teats and valves in a dry, closed container. • Always use only MAM teats with MAM bottles. • Use only sugar-free food or liquids. • To avoid injury, do not allow your child to walk around with the bottle. • NEVER put your child to bed with a bottle. Prolonged contact with liquids may cause severe tooth decay. • The bottle teat fits all wide-necked MAM bottles and Trainer+. • Insert the teat into the bottle ring from above until it clicks into place. • Keep these instructions for future reference. For your child's safety and health WARNING! • Continuous and prolonged sucking of liquids causes tooth decay. • Always check the temperature of the food before feeding. • Discard at the first signs of damage or weakness. • Keep unused parts out of the reach of children. • Never attach to cords, ribbons, shoelaces or loose parts of clothing. The child may be strangled. • Never use the feeding teat as a pacifier. • Always use this product under adult supervision. FAQ What capacities are the Easy Active bottles available in? The range includes 270 ml and 330 ml capacities. What age are these bottles suitable for? The manufacturer specifies from 2 months for the 270 ml bottle with a flow 2 teat, and from 4 months for the 330 ml bottle with a flow 3 teat. Take into account the marking on the teat being used. What makes the bottle easier to fill? The wide opening makes the bottle easier to fill and provides access to the inside during cleaning. Specifications Dispatch time: 24 hours Safety documents Official MAM Easy Active instructions, pages 9–10: https://www.mambaby.com/media/39/a0/b3/1727261428/EN_UK_leaflet_online_shop.pdf?ts=1727261428