Jané Basic folding bed guard rail 140 cm gray

-Jané Basic -Bed safety rail -rail length: 140 cm -foldable design -removable cover with mesh panel -fits under the mattress with adjustable straps -gray finish C01 -ex-display condition, very good; packaging may be damaged or replaced Jané Basic is a foldable 140 cm bed safety rail in gray finish C01. The mesh panel lets you keep an eye on your child, while the removable cover is easy to care for. Supports that slide under the mattress and adjustable fastening straps keep the rail stable against the side of the bed. The folding mechanism makes it easy to access the mattress. This model is designed for children aged 18 months to 5 years who can get in and out of bed on their own. It is not a substitute for a cot. The instructions specify beds measuring 80 × 190 cm to 150 × 200 cm and mattresses 15–30 cm thick. The top edge of the rail must extend at least 16 cm above the mattress. Leave a gap of at least 250 mm between each end of the rail and the corresponding end of the bed. Do not use if the sleeping surface is more than 600 mm above the floor. Care and safety The cover can be removed and hand-washed or machine-washed at a low temperature. Clean the metal tubes with a damp cloth. Check the assembly and locks carefully before using the rail again. Before first use, we recommend checking the manufacturer’s instructions, age recommendations, cleaning guidelines, and any compatibility with other accessories. Manufacturer’s warnings — verified English translation Foldable bed rail with removable cover WARNING 1. Do not use the rail for children under 18 months or over 5 years. Use it only when the child can get in and out of bed independently. 2. The rail is not a substitute for a cot, as it does not provide the same level of safety. 3. Use with beds measuring 80 × 190 cm to 150 × 200 cm and mattresses 15 to 30 cm thick. 4. After installation, check that the rail is fitted correctly and is stable. 5. Do not use on a sleeping surface more than 600 mm above the floor. Never use on a bunk bed, a children’s bed, or any other bed that does not comply with these instructions. 6. To avoid injury, follow the instructions for folding, installing, and using the rail carefully. 7. Do not leave the child unattended by an adult while installing or removing the rail. 8. Periodically check that the rail is securely and stably fitted and that the locking mechanisms are firmly secured. Check the overall condition of the rail, especially the safety of the locking mechanisms and hinges. 9. Keep away from fire. 10. Do not use accessories not approved by JANÉ. Purchase additional and replacement parts only from the manufacturer. 11. Do not use if the fittings are not in place and securely attached to the bed or mattress and the rail. 12. The rail is suitable for all types of bed bases. IMPORTANT: KEEP FOR FUTURE REFERENCE. Read all the instructions before folding and installing the rail. If you sell or give away the product, pass them on to the new owner. Before assembly, make sure all the parts listed in the instructions are present. The rail complies with BS 7972:2001+A1:2009. Made in China. Designed in Spain. ASSEMBLING THE FRAME The colors and design shown in the following assembly diagrams may differ from the model purchased. Before assembly, check that all parts shown in the instructions are present. 1. Fold or connect the upper tube A. 2. Feed one end of the connected bridge-shaped tube through the cover. Take care to ensure the JANÉ logo is on the outside. 3. Connect the side tubes C with the folding mechanism to both ends of the upper tube, then finish fitting the cover. 4. Connect the two parts of the lower tube D. 5. Feed the tube through the lower part of the cover. 6. Connect the tube to the side tubes by inserting the connecting pins. 7. Fit both stabilizing supports E onto the side tubes by inserting the connecting pins. 8. Place the rail on the floor and fold down each joint that forms a side corner. REMOVAL AND CLEANING 1. Remove the rail from the bed. 2. Disassemble it by following the assembly steps in reverse order. 3. The cover is removable. Remove it by following the assembly steps in reverse order. Hand-wash or machine-wash at a low temperature. 4. Clean the metal tubes with a damp cloth. ATTACHING TO THE BED Keeping the rail upright, slide the supports under the mattress. W If necessary, lift the edge of the mattress. Slide the rail all the way in so that it fits snugly against the side of the mattress. Attach the oval plate to the opposite edge of the mattress, on the side away from the rail. Adjust the strap length using the buckle. For stability, the strap must be fastened tightly and securely. WARNING: To prevent suffocation, after installation leave a gap of at least 250 mm between each end of the bed and the corresponding end of the rail. 1. The gap between the end of the rail and the headboard must be at least 25 cm (10 inches). 2. The rail must fit snugly and securely against the side of the mattress, and all fittings must be in place. 3. The top edge of the rail must extend at least 16 cm (6.3 inches) above the top edge of the mattress. Unfold the supports with straps C and place them under the mattress, above the bed base. Check the width of the mattress and adjust the safety straps accordingly. Attach the oval part on the opposite side, across the width of the mattress. Adjust the strap length using the buckle. FOLDING To lower the rail, lift the handles on both sides to unlock it. When the child is sleeping, lift both ends of the rail until it locks into place with the side joints, to prevent the child from falling out of bed. FAQ What age is the rail suitable for? From 18 months to 5 years, and only if the child can get in and out of bed independently. It is not a substitute for a cot. Which mattress does it fit? The instructions specify a thickness of 15–30 cm. At the same time, at least 16 cm of the rail must extend above the mattress; all installation requirements must be met. Is the cover removable? Yes. It can be removed and hand-washed or machine-washed at a low temperature, in accordance with the instructions. Specifications Shipping time: 24 hours Safety documents Official Jané Basic instructions: https://cdn.shopify.com/s/files/1/0995/7549/7030/files/Bed_Rail_Basic.pdf?v=1788444697