Foppapedretti Acquolina ST02 Baby Bath Support White and Grey

-Foppapedretti Acquolina ST-02 -baby bath support -contoured support placed in the bathtub -suction cups attach to a smooth tub bottom -perforated surface allows water to drain -for ages 0–6 months, maximum 9 kg, with earlier discontinuation based on the child’s development -ex-display condition, very good, packaging may be damaged or replaced Foppapedretti Acquolina ST-02 is a contoured support placed inside the bathtub while bathing a baby. Suction cups attach it to a suitably smooth tub bottom, and its perforated surface allows water to drain. The white and gray version has the designation 9700030841. The manufacturer specifies an age range of 0–6 months and a maximum weight of 9 kg. Stop using it when the child can sit up unaided or attempts to stand up unaided. The support is not a safety device: you must remain in contact with the child at all times during bathing. The water must not exceed the level marked on the product. Care and safety Wash with warm, soapy water and rinse thoroughly. Do not use harsh chemicals, abrasives, or oily bath additives. Store in a dry, well-ventilated place; do not stand it upright on the suction cups. Release the suction cups using their tabs and check their condition regularly. Before first use, read the manufacturer’s instructions, age recommendations, cleaning guidelines, and any restrictions regarding compatibility. When using products that work with other components, also confirm the dimensions, model, size, or compatibility with your existing equipment before purchase. With products for infants and young children, check the product’s condition regularly and stop using it at the first sign of damage or wear. If the product comes in multiple colors or versions, treat the photo and the designation on the packaging as final confirmation of the specific variant. Manufacturer’s warnings — verified Polish translation IMPORTANT! Read carefully and keep for future reference. Manufacturer’s warnings — verified Polish translation DANGER — a child may drown if left alone. WARNING — this is not a safety device. WARNING — DROWNING HAZARD. • Children have drowned while using bath aids. • Children can drown in as little as 2 cm of water in a very short time. • Always remain in contact with the child during bathing. • Never leave a child unattended in the bath, even for a few moments. If you need to leave the room, take the child with you. • Do not allow another child, even an older one, to take the place of an adult. WARNING • To prevent scalding from hot water, position the product so the child cannot reach the water outlet. • Always make sure the suction cups are firmly attached to the bathtub. • Do not use the product in a bathtub with an uneven surface. • Stop using it when the child can sit up unaided. IMPORTANT • The labels on the product contain permanent information — do not remove them. • Suitable for children from 0 to 6 months. Maximum weight: 9 kg (20 lb). • Attach the suction cups to the bottom of the bathtub by pressing them down before filling it. • Check that the product is stable before use. — Do not use the product if any parts are damaged or missing. — Do not use replacement parts other than those approved by the manufacturer or distributor. — Pull the product separately at each suction cup to check that it is securely attached. • Before use, check that the bathtub surface and the product are clean and free of oily substances that could cause slipping. • Always position the product so the child faces one of the ends of the bathtub, not its side; this ensures the suction cups adhere to a flatter surface. • Check the water temperature around the product before placing the child in it. The usual water temperature for bathing a child is 35°C to 38°C. • Check that the water level does not exceed the mark on the product. The mark indicates the maximum water level. • Prevent entanglement and entrapment: the child’s legs, arms, and fingers must remain free while using the product and when taking the child out of it. • Wash with warm, soapy water and rinse thoroughly. • Do not use harsh chemicals or abrasives. • Do not use oily bath additives; always use branded products intended for bathing infants. • Check that the bathtub is smooth and undamaged. • Do not use the product on raised, uneven, or non-slip surfaces. • Never lift or carry the product with the child inside. • Store the product in a dry, well-ventilated place to help it retain its original shape. • Drownings have occurred while using bath aids. This product does not provide any additional safety information regarding the risk of drowning. • SUCTION CUPS — release them using their tabs. Pulling on them may damage the suction cups. Check them regularly for wear. Gently move each suction cup left, right, forwards, and backwards to check for cracks or tears. If the suction cups are visibly damaged, stop using the product and discard it. Manufacturer’s warnings — verified Polish translation Store the product in a dry, well-ventilated place and do not stand it upright on the suction cups, to help it retain its shape. Manufacturer’s warnings — verified Polish translation IMPORTANT! The product can be used until the child can sit up unaided or attempts to stand up unaided. Do not use the product in a bathtub with an uneven bottom. Manufacturer’s warnings — verified Polish translation Note: Position the child correctly on the bath support. FAQ Is this a stand for a baby bathtub? No. Acquolina ST-02 is a support placed inside a suitable bathtub. When should I stop using it? Do not exceed 6 months or 9 kg. Stop earlier when the child can sit up unaided or attempts to stand up unaided. Does the support allow me to leave the child alone? No. It is not a safety device. You must always remain in contact with the child; a child can drown even in very shallow water. Specifications Dispatch time: 24 hours